UPSC photo size and signature size
Resize your UPSC photograph and signature to fit inside UPSC's published limits. Nothing is uploaded.
Drop your file hereAdd your file
JPG, PNG, WebP, up to 50 MB. You can paste with Ctrl or ⌘ and V.
Files stay on your device. How Merji keeps them private
UPSC takes a photograph and a signature as JPG files of at least 20 KB, between 350 and 1000 pixels on each side. The maximum differs between its pages. This page resizes both to fit inside every limit it publishes, on your device, so neither file is uploaded.
What UPSC says
Checked against UPSC\u2019s own pages on 22 October 2026.
Format, size and pixels
“The images of Photograph / Signature should be scanned in the “JPG/JPEG” format & Photo-ID should be in "PDF" format only. No other format is acceptable.”
“Each of the scanned images of the Photograph / Signature should not exceed 300 KB and must not be less than 20 KB in size. The resolution of Photograph and Signature are 350 pixel (Width) * 350 pixel (Height) minimum and 1000 pixel (Width) *1000 pixel (Height) maximum.”
A 2026 notice gives smaller maximums
“photograph file should not exceed 200 KB and must not be less than 20 KB in size and signature file should not exceed 100 KB and must not be less than 20 KB in size.”
The FAQ says up to 300 KB for each image; this notice says 200 KB for the photograph and 100 KB for the signature. They differ. Merji keeps the photograph at 200 KB or less and the signature at 100 KB or less, so it passes under either. Both are 400 × 400 pixels, inside UPSC’s 350 to 1000.
On the signature and on mismatches
“You should scan your Signature which has been affixed on white paper preferably with black ink pen for its better visibility.”
“UPSC is concerned with identification of a candidate at the Exam Hall based on the images uploaded by the candidate and not to cancel the candidature based on the size or color of ink used.”
A notice for another UPSC exam can set its own sizes, so read the one for the exam you are applying to.
More help: photo and signature resize for other exams, NEET photo size, compress a PDF to 200 KB.
How to do it
- Scan or photograph your signature on white paper in black ink, and take a clear recent photograph of yourself.
- Drop the photograph here, keep Photograph selected, drag the box to frame your face and press Resize. Download the JPG.
- Drop your signature, choose Signature, crop close around it and press Resize.
- Upload both on the UPSC application form. Your photo ID is a separate file and must be a PDF.
What usually goes wrong
UPSC gives two different maximum sizes
The online-application FAQ says each image may be up to 300 KB. The Indian Economic Service/Indian Statistical Service 2026 notice says 200 KB for the photograph and 100 KB for the signature. Merji keeps the photograph at 200 KB or less and the signature at 100 KB or less, so it passes under either.
The pixel size looks wrong
UPSC asks for at least 350 by 350 and at most 1000 by 1000 pixels. Merji makes both 400 by 400. The FAQ also says UPSC is concerned with identifying the candidate at the exam hall, not with cancelling a candidature over the size or colour of the ink.
The file is under 20 KB
UPSC sets a minimum of 20 KB as well as a maximum. Merji pads a very small file up to the minimum without changing the picture, so it doesn't fail the lower limit.
The signature is faint
The FAQ asks for the signature on white paper, preferably in black ink, for better visibility. Use a dark pen and leave Clean up the paper ticked.
The photo ID is rejected
The photo ID is not a JPG. The FAQ says Photo-ID should be in PDF format only, so don't run it through the image resizer.